Passat GLS Wagon L4-1.8L Turbo (AUG) (2001)
Tensioning roller from 08.00 (must be adjusted)
-
Insert an hex wrench into hex socket up to stop and press tensioning roller in counter clockwise direction (in direction of arrow) with uniform
non-excessive force until the tensioning device of the toothed belt can be aligned using T10008 locking plate.
Note: Toothed belt tensioning device is an oil damper device and can only be compressed slowly and with equal force. Excessive force during
compression can damage tensioning roller.
-
To loosen toothed belt, loosen nut -1 of tensioning roller and turn pin wrench in direction of arrow using 3387 pin wrench.
Note: Impact tab -A- of pin wrench must not be bent.
Continuation for all
-
Remove toothed belt.
-
Then turn crankshaft back slightly.
Installing
Requirement
-
Pistons must not be positioned in TDC.
Work sequence