Passat GLS Wagon L4-1.8L Turbo (AUG) (2001)
-
Connect VAG 1598/31 adapter cable to control module wiring harness. Engine Control Module (ECM) is not connected.
-
To measure voltage, connect multimeter between sockets 3 (terminal 15) + 54 (speed signal) of test box.
-
Switch ignition on.
-
Jack up front left wheel.
-
Rotate front wheel, and observe voltage indicated while doing so. Specification: oscillating between 0 and at least 4 volts
If indicated voltage does not oscillate:
-
Check wires going to speedometer and speed sensor.