volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Charge Air Pressure Sensor (1.8 Liter Engine) [G31]|Page 6133 > < Charge Air Pressure Sensor (1.8 Liter Engine) [G31]|Page 6131
Page 2
background image

-

Switch ignition off.

-

Disconnect 4-pin connector -2- from charge air pressure sensor (G31) -2-.

-

Use adapter cables from V.A.G 1594 to connect multimeter to terminals 1 + 3 of connector for voltage measurement.

-

Switch ignition on.
Specification: at least 4.5 V

-

Switch ignition off.

If specified value is not obtained:

-

Connect VAG1598/31 test box to control module wiring harness. Engine Control Module (ECM) is not connected.

Charge Air Pressure Sensor (1.8 Liter Engine) [G31]|Page 6133 > < Charge Air Pressure Sensor (1.8 Liter Engine) [G31]|Page 6131