volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Valve Clearance > < Compression Check|Specifications|Page 4313
Page 2
background image

-

Remove fuse 32 from fuse holder.

Note:  By removing fuse 32, voltage supply to the fuel injectors is interrupted.

-

Disconnect connectors for ignition coils.

-

Remove ignition coils, Refer to Powertrain Management.

-

Unscrew spark plugs using 3122B spark plug removal tool.

-

Have a second technician depress accelerator pedal completely.

-

Test engine compression using VAG1381 or VAG1763 compression tester.

Note:  Using VAG1381 or VAG1763 compression tester = operating instructions.

-

Have a second technician operate the starter.

-

Activate starter until no further pressure increases are indicated by VAG1381 or VAG1763 compression tester.

Compression values:

New: 10 to 14 bar positive pressure, Wear limit: 7.0 bar positive pressure

Tolerated deviation between cylinders: maximum 3 bar
-

install spark plugs and ignition coils.

-

Check DTC memory: Refer to Powertrain Management.

Valve Clearance > < Compression Check|Specifications|Page 4313