Passat GLS Wagon L4-1.8L Turbo (AUG) (2001)
-
Remove nut -2- and cross head screws -3
-
Remove heat shield -1-.
-
Remove front wheel.
-
Remove synthetic material nut -1-.
-
Pry out clips -2-.
-
Take out cover for tie rod.
-
Open clips on boot.
Illustration shows tie rod for vehicles with V6 engine.
On vehicles with 4-cyl. engine, open clip on steering gear.
-
Loosen bolts -3- and -4- and pull tie rod ball joint off downward.
-
Pull boot as far as possible outward.