Passat GLS Wagon L4-1.8L Turbo (AUG) (2001)
![background image](/volkswagen/passat_gls_wagon/l4-1.8l_turbo_(aug)/Page-1909002.png)
-
Loosen connectors (arrows).
Installing
-
Install in reverse order of removal.
NOTE:
-
When installing the sensor for steering angle the correct and tension free position of the component must be ensured.
-
Front wheels and steering wheel must be in straight ahead position.
-
When installing new sensor for steering angle, remove transport coating on markings.
-
Position steering angle sensor, until mounting clips lock in properly.
-
Position steering wheel sensor in center position.
-
In the hole -1- a yellow dot must be visible
-
The markings(arrows) must align
-
Then carry out basic settings (the zero position must be re-calibrated).