Passat GLS Wagon L4-1.8L Turbo (AUG) (2001)
-
Fit connector in transmission housing with flat part -arrow A- facing toward oil pan.
-
Align dowel pin on valve body -arrow B with drilling in transmission housing -arrow C-.
-
Place valve body in position so that pin of detent plate -1- engages in slot on selector slide -2-.
-
Tighten bolts (hand-tight) securing valve body-arrows-.
-
The bolt identified by arrow -A- is shorter than the other bolts.
-
Tighten bolts to specified torque, working from the inside outward.