Passat GLS Wagon L4-1.8L Turbo (AUG) (2001)
-
So that the wire does not become trapped when installing the valve body, route the wire with connector -C- according to the diagram.
-
Lubricate new O-rings for connector on wiring harness with ATF.
-
Fit connector in transmission housing with flat part -arrow A- facing toward oil pan.
-
Align dowel pin on valve body-arrow B with drilling in transmission housing -arrow C-.
-
Place valve body in position so that pin of detent plate -1-, engages in slot on selector slide -2-.