Passat GLS Wagon L4-1.8L Turbo (AUG) (2001)
-
Always replace flange shaft circlip.
-
Clamp flange shaft in vice, using vice clamps. Use new circlip -A- to press old circlip out of groove in flange shaft.
-
Pull out flange shaft oil seal with VW 681.
Installing
Notes:
-
Repair pressing depth 6.5 mm if same flanged shaft is used again.
-
Seal can also be driven in with punch 2062.
-
Lightly oil outer circumference of oil seal.
-
Knock new right-hand flange shaft oil seal in 5.5 mm below housing outer surface, do not cant seal when doing this.
-
Fill space between sealing lip and dust lip with grease G 052 128 A1.