Passat GLS Wagon V6 V6-2.8L (ATQ) (2001)
/Page-1675007.png)
-
Screw in valve body securing bolts -arrows- hand-tight from the inside outward.
-
Bolt -arrow A- is not fitted and should therefore be ignored.
-
Tighten bolts to specified torque setting, working from the inside outward.
-
Fit connector -A- to transmission vehicle speed sensor-G38-.
-
Pull up wire to sensor for transmission RPM between the valve body and wiring harness.
-
Fit connector -B- to sensor for transmission RPM -G182-.
-
Press in securing clip -arrow- for connector on wiring harness until retaining tab engages.
-
Moisten seal on intake neck of ATF screen with ATF.
-
Carefully push intake neck of ATF screen in opening of valve body.
