Passat GLX Wagon V6 V6-2.8L (ATQ) (2001)
-
Loosen instrument panel cross member -4- if necessary.
Installing
Install in reverse order of removal, noting the following:
-
Inspect all heating and A/C unit housing seals for damage and replace if necessary before installation.
-
Ensure all electrical harness tie straps are replaced and installed in their original locations.
-
Replace both evaporator inlet/outlet 0-rings.
-
Ensure refrigerant pipes are reinstalled stress free.
-
Ensure evaporator water drain and drain valve are installed and function properly.