Passat GLX Wagon V6 V6-2.8L (ATQ) (2001)
Wheel Bearing: Service and Repair
Rear Suspension
Wheel bearing/wheel hub, removing and installing
Removing
-
Remove wheel.
-
Remove securing bolts -arrows- from brake caliper housing while counter holding on guide pins.
-
Take off brake caliper housing and secure with wire so that the weight of the brake caliper does not stress or damage the brake hose.
-
Remove brake pads.
-
Take off disc brake.
-
Unscrew bolts -arrows- for wheel bearing/wheel hub unit.
-
Remove wheel bearing/wheel hub unit.
Installing
Install in reverse order.
-
Install wheel and tighten.
Tightening torques:
Wheel bearing to rear axle - 60 Nm
Wheel mounting for vehicles with front wheel drive, assembly overview
The wheel bearing and wheel hub are installed together in a housing.
This wheel bearing/hub unit is maintenance and adjustment free. Adjusting and servicing is not possible!