Passat Sedan L4-1896cc 1.9L DSL Turbo (1Z) (1997)
/Page-892003.png)
-
Tightening torque: 25 Nm (18 ft. lbs.)
-
Use a torque wrench with an adjustment range: 5-50 Nm (e.g. tool No. VAG 1331, or equivalent)
-
Ensure that threads of spindle on the pliers are easy to move. If necessary lubricate with MoS2 grease
-
If difficult to move, e.g. dirt in the threads, the required tightening force of the clamp is not achieved with the specified torque.
Fig. 4 - Clamp, Tightening On Small Diameter
