Passat Sedan L4-2.0L Turbo (BPY) (2007)
Tail Lamp: Service and Repair
Tail Lamps
Rear Lid Tail Lamps
Tail Lamps
Rear Lid Tail Lamps
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1783)
‹› Illustrations depict removal and installation of the left side. Removal and installation of the right side is performed the same way.
Removing:
-
Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).
-
Unclip service cover - 1 - in - direction of arrow - from trim - 2 -.
-
Disconnect the connector - 1 - from the bulb holder - 2 -.
-
Remove both nuts - 3 -.
-
Remove the tail lamp back out of the rear lid.
Installing: