Passat Sedan L4-2.0L Turbo (CCTA) (2010)
/Page-405003.png)
-
Extract engine oil using old oil collecting and extracting unit (V.A.G 1782).
-
Remove oil drain plug
-
Let engine oil drain.
‹› Observe waste disposal regulations!
-
Screw in new oil drain plug with sealing ring hand-tight.
-
Fill up with engine oil. Note oil specification.
Torque specifications for oil drain plug: 30 Nm
CAUTION!
‹› Torque settings must not be exceeded
‹› A torque figure that is too high may lead to leaks or even damage the oil pan.
Oil Filter, 2.0L TFSI, Removing and Installing
Special tools, testers and auxiliary items required
‹› Oil drain adapter (T40057)
‹› Oil filter wrench (VAS 3417)
‹› Torque Wrench (V.A.G 1331/)