Passat Sedan V6-2792cc 2.8L DOHC (AAA) (1995)
/Page-62002.png)
-
Press keys -0- and -6- to select the address word for "end output"
-
Press -Q- key to confirm input.
NOTE: If the Airbag Control Module code number is not accepted, the following error message will appear:
-
In this case, the Airbag Control Module has not been programed with the data required for the vehicle. Coding is therefore not possible. The MIL
K75 stays on.
-
Check if the correct control module was installed or if an incorrect code number was used.
