Passat Sedan V6-2792cc 2.8L DOHC (AAA) SFI (1997)
Brake Pedal Assy: Service and Repair
Brake Pedal to Brake Booster, Disconnecting and Connecting
Exploded View Of Pedal Cluster
Component Notes And Information
NOTE:
^
During Service procedures, refer to the illustration above and the notes below.
^
During removal and installation procedures, refer to the component location illustration above and component notes below.
^
Grease all mountings before installing with G 000 602 grease.
1
Securing clip
-
Ensure securely seated
2
Pin
3
Brake servo push rod clevis
4
Self-locking hex nut
-
Tighten to: 20 Nm (15 ft lb)
5
Brake pedal pivot pin
6
Brake pedal return spring
7
Return spring mounting tube
8
Brake pedal mounting bushing
9
Brake pedal
10
Clutch pedal
11
Pedal cluster mounting bracket
12
Clutch pedal pivot pin
13
Clutch pedal mounting bushing
14
Over-center spring mounting
15
Over-center spring
-
Before removing, remove clutch pedal
16
Securing clip
-
Ensure seated securely
17
Brake Light Switch
-
Adjusting. Refer to Lighting and Horns
CAUTION: The brake pedal travel must not be restricted by additional floor coverings.
Removal