volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Cooling System|Coolant > < After-Run Coolant Pump|Specifications|Page 1663
Page 2
background image

Coolant (Water) Pump (4)
-

Check shaft for ease of movement.

O-ring (5)
-

Always replace.

Continued Coolant Circulation Pump (8)
-

Secured with bracket to the camshaft sprocket cover.

Retaining Clip (10)
-

Ensure it is seated securely.

Engine Coolant Temperature (ECT) Sensor (11)
-

For Climatronic climate control system.

-

Color Black.

-

2 pin connector.

Cap (14)
-

Check using pressure tester tool No. VAG 1274, or equivalent.

-

Test pressure: 1.3-1.5 bar (18.85-21.75 psi) 

Bolt/Screw (16)
-

Tighten to: 10 Nm (7 ft lbs.). 

ATF Cooler (20)
-

Refer to Transmission and Drivetrain.

Thermostat Housing (21)
-

Refer to Thermostat, Engine Cooling.

Engine Oil Cooler (23)
-

Refer to Engine Lubrication found in the Engine section.

Coolant Drain Screw (25)
-

Tighten to: 10 Nm (7 ft. lbs.).

Cooling System|Coolant > < After-Run Coolant Pump|Specifications|Page 1663