Passat Sedan V6-2792cc 2.8L DOHC (AAA) SFI (1997)
Radiator Cooling Fan Motor: Service and Repair
LEGEND
1
Bolt/Screws
2
Cover
3
Lock Carrier
4
Air Ducting
5
Bracket
6
Engine Coolant Radiator
7
Rubber Washer
8
V-belt
9
Expanding Pin
10
Guide Ring
11
Additional Fan
12
Fan Ring
13
Connector
14
Radiator Cooling Fan
15
Thermo Switch
16
Lower Coolant Hose
17
Connection
18
O-ring
19
Retaining Clip
20
Upper Coolant Hose
NOTE: During removal and installation procedures, refer to the component location illustration above and component notes below.
COMPONENT NOTES
Bolt (1)
-
Tighten to: 10 Nm (7 ft. lbs.).
Engine Coolant Radiator (6)
-
After replacing, replace entire coolant supply with new mixture.
Guide Ring (10)
-
Note installed position.
-
Mounted on fan ring (item12) using clips.
Thermo Switch (15)