Passat Sedan V6-2792cc 2.8L DOHC (AAA) SFI (1997)
13
Pedal cluster mounting bracket
-
Always replace self-locking nuts for mounting bracket and brake master cylinder
-
Tighten to: 25 Nm (18 ft lbs)
14
Brake pedal
PROCEDURES
REMOVAL
-
Remove lower left trim panel, driver's side, refer to Body and Frame.
-
Using clutch pedal, apply tension to over-center spring and install spring retainer 3317 from above.
NOTE: The hole (-arrow-) in the retainer faces toward the clutch pedal.
-
Release clutch pedal (return to rest position) and remove over-center spring along with spring retainer 3317.
INSTALLATION
-
Depress clutch pedal.
-
First place over-center spring in position (-arrow A-), then lower vertically until spring retainer 3317 seats on clutch pedal mounting lug (-arrow
B-).
-
Remove spring retainer while returning clutch pedal to rest position.