Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Brakes and Traction Control > Antilock Brakes / Traction Control Systems > Hydraulic Control Assembly - Antilock Brakes > Component Information > Service and Repair > Control Module and Hydraulic Unit Assembly Overview > Page 4311

Page 1
background image

Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Control Module and Hydraulic Unit

Control Module and Hydraulic Unit

Special tools, testers and auxiliary items required

‹› Torque wrench (V.A.G 1331)

‹› Torque wrench (V.A.G 1410)

‹› Brake Pedal Actuator (V.A.G 1869/2)

Sealing Plug from Repair Kit 1H0 698 311 A

1

Transport protection for valve domes (foam) 

2

Sealing plug M 10

3

Sealing plug M 12

Removing

Component location:

The control module is bolted to the hydraulic unit and is located at right in the engine compartment.

CAUTION!
Do not bend the brake lines near the hydraulic unit.

-

Read and note the present control module coding.

-

If the vehicle has a coded radio, get the radio code from the customer before beginning.

-

Disconnect battery.

-

Remove engine cover.

With a 3.6 L Engine

Brakes and Traction Control > Antilock Brakes / Traction Control Systems > Hydraulic Control Assembly - Antilock Brakes > Component Information > Service and Repair > Control Module and Hydraulic Unit Assembly Overview > Page 4311

[PREV PAGE] [NEXT PAGE]