Passat Sedan V6-3.6L (BLV) (2008)
‹› 10 Nm
‹› Apply a thin coat of assembly paste G 052 150 A2 to the threads before screwing in.
3 - Caps
‹› Insert in bushing
4 - Guide Pins
‹› 30 Nm
5 - Bushing
‹› Insert in brake caliper
6 - Brake Caliper
7 - Brake Carrier
‹› Bolt to brake caliper
8 - Retaining Spring
‹› Insert with both ends in holes of brake caliper
9 - Seal
‹› Removing and installing, refer to => [ Piston, FN 3 Caliper ] See: Overhaul/Piston, FN 3 Caliper
10 - Pistons
‹› Removing and installing, refer to => [ Piston, FN 3 Caliper ] See: Overhaul/Piston, FN 3 Caliper
‹› Apply thin coat of assembly paste G 052 150 A2 to piston before inserting
11 - Protective Cap
‹› Removing and installing, refer to => [ Piston, FN 3 Caliper ] See: Overhaul/Piston, FN 3 Caliper
‹› Do not damage when installing piston
Front Brake Caliper Assembly Overview, FNR-G
Front Brake Caliper Assembly Overview, FNR-G
‹› Install complete repair kit when servicing.
‹› Only use mineral spirits to clean brake parts.
‹› Apply thin coat of assembly paste G 052 150 A2 to brake cylinders, pistons and seals.