Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Brakes and Traction Control > Disc Brake System > Brake Rotor/Disc > Component Information > Technical Service Bulletins > Customer Interest for Brake Rotor/Disc: > 4611-05 > Apr > 11 > Brakes - Abnormal Vibration When Braking > Page 4431

Page 3
background image

Replace sanding disc prior to moving to next brake disc surface.

Clean all brake disc friction surfaces using soap and water solution.

Deglaze and Clean Brake Pads

^

Place 80-grit sand paper on flat hard surface.

^

Carefully sand brake pads until the surface glazing is removed.

^

Measure brake pad thickness using metric scale. If any brake pad is equal to or less than 50 percent of original thickness of new brake pads
(excluding backing plate):

^

Replace all 4 brake pads on axle you are servicing.

Tip:

See appropriate Repair Manual in ElsaWeb for new brake pad thickness dimensions.

Reassembly

^

Install brake discs, brake pads, brake calipers and wheels. See appropriate Repair Manual in ElsaWeb for vehicle you are servicing.

^

Road test vehicle to confirm vibration concern is corrected.

No Special Parts required.

Brakes and Traction Control > Disc Brake System > Brake Rotor/Disc > Component Information > Technical Service Bulletins > Customer Interest for Brake Rotor/Disc: > 4611-05 > Apr > 11 > Brakes - Abnormal Vibration When Braking > Page 4431

[PREV PAGE] [NEXT PAGE]