Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Brakes and Traction Control > Hydraulic System, Brakes > Brake Caliper > Component Information > Service and Repair > Removal and Replacement > Page 4488

Page 4
background image

‹› 4 Nm

5

Brake Carrier

‹› Bolt to wheel bearing housing

6

Retaining Spring

‹› Insert in brake pad retaining spring and press below brake carrier. 

7

Ribbed Bolt

‹› 190 Nm

‹› Clean if using again.

8

Brake Pads

‹› Thickness: 14 mm without backing plate

‹› With wear indicator

‹› When wear limit is reached (limit: approximately 4 mm), the warning lamp lights up in instrument cluster

‹› Wear limit: 2 mm without backing plate

‹› Check the thickness.

‹› Must always be replaced together on both sides of axle

‹› Removing and installing, refer to => [ Brake Pads ] See: Front Brakes, FNR-G Brake Caliper

9

Brake Caliper

‹› Do not bolt to brake hose/brake line when changing brake pads

‹› Must not be removed

‹› Removing and installing, refer to => [ Brake Caliper ] See: Front Brakes, FNR-G Brake Caliper

‹› Servicing, refer to => [ Front Brake Caliper Assembly Overview, FNR-G ] See: Front Brake Caliper Assembly Overview, FNR-G

10

Guide Pins

‹› 30 Nm

11

Cap

‹› Remove

12

Washer

13

Vibration Damper

14

Bolt, 

‹› 10 Nm

15

Dust Cap

16

Bracket

17

Bolt

‹› 15 Nm

Brakes and Traction Control > Hydraulic System, Brakes > Brake Caliper > Component Information > Service and Repair > Removal and Replacement > Page 4488

[PREV PAGE] [NEXT PAGE]