Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Brakes and Traction Control > Hydraulic System, Brakes > Brake Caliper > Component Information > Service and Repair > Removal and Replacement > Page 4496

Page 12
background image

Torque specification for wheel bolts.

‹› Before moving vehicle, depress brake pedal several times firmly to properly seat brake pads in their normal operating position.

‹› Check brake fluid level.

Front Brakes, FNR-G Brake Caliper

Front Brakes, FNR-G Brake Caliper

=> [ Brake Pads ] 

=> [ Brake Caliper ] 

Brake Pads

Special tools, testers and auxiliary items required

‹› Torque Wrench (V.A.G 1331)

‹› Piston Resetting Tool (T10145)

Removing

When removing, mark brake pads that will be used again. Install in the same position, otherwise braking effect will be uneven!

-

Remove wheels.

-

Pry brake caliper retaining spring out of brake pad retaining spring with screwdriver. To do this, place screwdriver between both retaining springs
 close-up -.

-

Secure brake caliper retaining spring with a cloth when doing this so that it cannot jump away.

-

Separate the connector - 1 - for brake pad wear indicator. 

Brakes and Traction Control > Hydraulic System, Brakes > Brake Caliper > Component Information > Service and Repair > Removal and Replacement > Page 4496

[PREV PAGE] [NEXT PAGE]