Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Brakes and Traction Control > Hydraulic System, Brakes > Brake Caliper > Component Information > Service and Repair > Removal and Replacement > Page 4505

Page 21
background image

-

Make sure that the brake pads are located correctly in the anti-rattle springs - arrows -.

-

Secure brake caliper using new self-locking bolts.

‹› The repair kit includes four self-locking hex bolts which must be installed in all cases.

After driving the pistons out with the (VAS 5051), a basic setting of the brake system must be performed.

-

Perform the brake system basic setting with the (VAS 5051).

-

Install wheels.

‹› Check brake fluid level after replacing brake pad.

Brake Caliper

Special tools, testers and auxiliary items required

‹› Torque Wrench (V.A.G 1331)

‹› Brake Pedal Actuator (V.A.G 1869/2)

Brakes and Traction Control > Hydraulic System, Brakes > Brake Caliper > Component Information > Service and Repair > Removal and Replacement > Page 4505

[PREV PAGE] [NEXT PAGE]