Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Brakes and Traction Control > Hydraulic System, Brakes > Brake Caliper > Component Information > Service and Repair > Removal and Replacement > Page 4514

Page 7
background image

The pressure nut presses the piston out of the brake caliper.

-

Remove the piston with the protective boot from the brake caliper. 

-

Remove seal with (3409).

Installing

-

The surface of the piston and seal must only be cleaned with mineral spirits and then dried.

-

Thinly coat piston and seal with assembly paste G 052 150 A2 before inserting.

-

Insert oil seal into brake caliper.

-

Place protective cap with outer sealing lip on piston.

Brakes and Traction Control > Hydraulic System, Brakes > Brake Caliper > Component Information > Service and Repair > Removal and Replacement > Page 4514

[PREV PAGE] [NEXT PAGE]