Volkswagen Workshop Manuals
Passat Sedan V6-3.6L (BLV) (2008)
Brakes and Traction Control > Hydraulic System, Brakes > Brake Master Cylinder > Component Information > Service and Repair > Brake Master Cylinder > Page 4567
Brake Master Cylinder: Service and Repair
Brake Booster and Master Cylinder Assembly Overview
‹› Use only new brake fluid. Observe information on brake fluid reservoir!
Self-Locking Hex Nut
‹› Always replace after removal
‹› 25 Nm
‹› For brake booster
‹› On gasoline engines, vacuum is supplied from intake manifold.
‹› Vehicles with FSI engine without HBV are equipped with a pressure sensor. Refer to => [ Brake Booster Pressure Sensor ] See: Power Brake
Assist/Brake Booster Vacuum Sensor/Service and Repair/Brake Booster Pressure Sensor
‹› On vehicles with a hydraulic brake booster, a vacuum sensor is installed. Refer to => [ Brake Booster Vacuum Sensor ] See: Power Brake
Assist/Brake Booster Vacuum Sensor/Service and Repair/Brake Booster Vacuum Sensor
|[PREV PAGE] [NEXT PAGE]|