Passat Sedan V6-3.6L (BLV) (2008)
/Page-1291001.png)
Vacuum Brake Booster: Locations
Brake Booster and Master Cylinder Assembly Overview
‹› Use only new brake fluid. Observe information on brake fluid reservoir!
1
Pedal Assembly
2
Self-Locking Hex Nut
‹› Always replace after removal
‹› 25 Nm
3
Gasket
‹› For brake booster
4
Brake Booster
‹› On gasoline engines, vacuum is supplied from intake manifold.
‹› Vehicles with FSI engine without HBV are equipped with a pressure sensor. Refer to => [ Brake Booster Pressure Sensor ] See: Brake Booster
Vacuum Sensor/Service and Repair/Brake Booster Pressure Sensor
‹› On vehicles with a hydraulic brake booster, a vacuum sensor is installed. Refer to => [ Brake Booster Vacuum Sensor ] See: Brake Booster
Vacuum Sensor/Service and Repair/Brake Booster Vacuum Sensor
‹› Functional check:
