Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Brakes and Traction Control > Sensors and Switches - Brakes and Traction Control > Parking Brake Release Switch > Component Information > Service and Repair > Electro-Mechanical Parking Brake Button E538, Removing and Installing > Page 4752

Page 1
background image

Parking Brake Release Switch: Service and Repair
Parking Brake Button

Parking Brake Button

The following components are integrated in the Electro-Mechanical Parking Brake Button E538 :

-

Electro-mechanical Parking Brake Indicator Lamp K213

-

-AUTO HOLD- Indicator Lamp 2 K238

Special tools, testers and auxiliary items required

-

Trim removal wedge VAS 3409

NOTE:  When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool ( trim
removal wedge 3409, screwdriver) will be positioned, using commercially available adhesive tape.

Removing:

-

Switch off ignition and all electrical components and move ignition key or start button into position 0 (preliminary engaged position).

-

Remove side cover - 1 - of instrument panel, do this by inserting trim removal wedge 3409 or a screwdriver into recess - 2 - and pry off cover - 1 -
in - direction of arrow -.

-

Push Electro-Mechanical Parking Brake Button E538 - 1 - out of instrument panel from rear.

Brakes and Traction Control > Sensors and Switches - Brakes and Traction Control > Parking Brake Release Switch > Component Information > Service and Repair > Electro-Mechanical Parking Brake Button E538, Removing and Installing > Page 4752

[PREV PAGE] [NEXT PAGE]