Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Engine, Cooling and Exhaust > Engine > Camshaft, Lifters and Push Rods > Variable Valve Timing Actuator > Component Information > Service and Repair > Camshaft Adjuster With Timing Chain, Installing > Page 1879

Page 10
background image

‹› The exhaust camshaft adjuster must be able to be installed easily onto the exhaust camshaft and the bolt be tightened hand tight.

‹› A slight offset between the 32A mark and the notch is permitted.

-

Remove the (T10363) out of the bearing shaft.

-

Remove the (T10068 A).

-

Install the timing chain tensioner and tighten it to 50 Nm.

-

Rotate the crankshaft 2 revolutions in the engine rotation direction and check the valve timing.

Engine, Cooling and Exhaust > Engine > Camshaft, Lifters and Push Rods > Variable Valve Timing Actuator > Component Information > Service and Repair > Camshaft Adjuster With Timing Chain, Installing > Page 1879

[PREV PAGE] [NEXT PAGE]