Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Engine, Cooling and Exhaust > Engine > Camshaft, Lifters and Push Rods > Variable Valve Timing Actuator > Component Information > Service and Repair > Camshaft Adjuster With Timing Chain, Installing > Page 1883

Page 3
background image

-

Remove the upper and lower coolant pipes from the timing chain cover.

-

Remove the timing chain cover bolts - arrows - from the cylinder head.

‹› Bolts - A - are not on vehicles with a mechanical vacuum pump.

CAUTION!
‹› Carefully cover the lower chain compartment so no parts can fall in.

‹› Do not completely remove the camshaft adjustment valve bolt so that the valve is not tilted when removed.

-

Loosen the camshaft adjustment valve bolts - arrows - approximately 3 mm (5 turns) using (T10072).

Engine, Cooling and Exhaust > Engine > Camshaft, Lifters and Push Rods > Variable Valve Timing Actuator > Component Information > Service and Repair > Camshaft Adjuster With Timing Chain, Installing > Page 1883

[PREV PAGE] [NEXT PAGE]