Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Engine, Cooling and Exhaust > Engine > Drive Belts, Mounts, Brackets and Accessories > Idler Pulley > Component Information > Service and Repair > Ribbed Belt Pulley Without Freewheel, Removing and Installing > Page 2017

Page 1
background image

Idler Pulley: Service and Repair
Ribbed Belt Pulley With Freewheel, Removing and Installing - Mfr: Bosch

Ribbed Belt Pulley With Freewheel, Removing And Installing - Mfr: Bosch

Special tools, testers and auxiliary items required

-

Multi-point adapter VAS 3400

-

Torque wrench VAG 1332 (or 40 - 200 Nm equivalent)

Removing:

-

Remove generator.

-

Tighten the generator in a vise at the attachment points.

-

Remove protective cap from ribbed belt pulley with freewheel.

-

Insert multi-point adapter VAS 3400 into ribbed belt pulley with freewheel of generator using ring wrench 17 mm.

-

Insert a multi-point socket insert M10 -1 - in generator shaft.

Engine, Cooling and Exhaust > Engine > Drive Belts, Mounts, Brackets and Accessories > Idler Pulley > Component Information > Service and Repair > Ribbed Belt Pulley Without Freewheel, Removing and Installing > Page 2017

[PREV PAGE] [NEXT PAGE]