Volkswagen Workshop Manuals
Passat Sedan V6-3.6L (BLV) (2008)
Engine, Cooling and Exhaust > Engine > Timing Components > Timing Chain > Component Information > Service and Repair > Primary Chain, Installing > Page 2253
Camshaft bar T10068 A must not be inserted during this process.
Be aware that all chain sprocket securing screws/bolts must be replaced.
Tighten the new bolts for the intake and exhaust camshaft adjuster to 60 Nm + 90 degree (1/4 turn).
Now install sealing flange as follows.
|[PREV PAGE] [NEXT PAGE]|