Passat Sedan V6-3.6L (BLV) (2008)
-
Brown, 4-pin
9
-
Oxygen sensor behind three way catalytic converter G130, 50 Nm
-
Bank 1, sensor 2
-
Installed in the exhaust gas stream of cylinders 1, 2 and 3
-
Grease thread only using G 052 112 A3 ; do not let G 052 112 A3 get onto slits of oxygen sensor body
-
Use ring spanner set for oxygen sensor 3337 for removal and installation
10
-
Heat shield
11
-
Intake manifold support
12
-
20 Nm
13
-
Gasket
-
Replace
14
-
Exhaust manifold
15
-
25 Nm
-
Replace
16
-
Front muffler
17
-
To middle muffler
18
-
25 Nm
19
-
Suspended mount
-
For front exhaust pipe at left and right
20
-
Catalytic converter.
-
Installed in exhaust stream of cylinder 1, 2 and 3 on right side as well as 4, 5 and 6 on left side
21
-
Primary catalytic converter
-
With flex joint
-
Flex joints must not be bent more than 20 degrees - otherwise they may be damaged
-
Installed in exhaust stream of cylinder 1, 2 and 3 on right side as well as 4, 5 and 6 on left side