Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Engine, Cooling and Exhaust > Exhaust System > Exhaust Pipe > Component Information > Service and Repair > Front Exhaust Pipes With Catalytic Converters and Front Mufflers > Page 2540

Page 1
background image

Exhaust Pipe: Service and Repair
Exhaust Manifold, Front Exhaust Pipes With Catalytic Converters and Front Mufflers Overview

Exhaust Manifold, Front Exhaust Pipes with Catalytic Converters and Front Mufflers Overview

‹› Some vehicles have an additional oxygen sensor installed after the catalytic converters - item 20 -. Both sensors are actually connected but do not

function.

1

Connector

‹› Brown, 6 pin

2

Heated Oxygen Sensor (HO2S) 2 (G108), 

‹› 50 Nm

‹› Bank 2, sensor 1.

‹› Installed in the exhaust gas stream of cylinders 4, 5 and 6.

‹› Lubricate the threads only with (G 052 112 A3); do not let the (G 052 112 A3) get onto the slits of the oxygen sensor body.

‹› Removing and installing, refer to => [ Heated Oxygen Sensor and Heated Oxygen Sensor 2 ] See: Powertrain Management/Computers and

Control Systems/Oxygen Sensor/Service and Repair/Removal and Replacement/Heated Oxygen Sensor and Heated Oxygen Sensor 2.

3

Nut

‹› M8 - 25 Nm

Engine, Cooling and Exhaust > Exhaust System > Exhaust Pipe > Component Information > Service and Repair > Front Exhaust Pipes With Catalytic Converters and Front Mufflers > Page 2540

[PREV PAGE] [NEXT PAGE]