Passat Sedan V6-3.6L (BLV) (2008)
Muffler: Locations
Exhaust Manifold, Front Exhaust Pipes with Catalytic Converters and Front Mufflers Overview
‹› Some vehicles have an additional oxygen sensor installed after the catalytic converters - item 20 -. Both sensors are actually connected but do not
function.
1
Connector
‹› Brown, 6 pin
2
Heated Oxygen Sensor (HO2S) 2 (G108),
‹› 50 Nm
‹› Bank 2, sensor 1.
‹› Installed in the exhaust gas stream of cylinders 4, 5 and 6.
‹› Lubricate the threads only with (G 052 112 A3); do not let the (G 052 112 A3) get onto the slits of the oxygen sensor body.
‹› Removing and installing, refer to => [ Heated Oxygen Sensor and Heated Oxygen Sensor 2 ] See: Powertrain Management/Computers and
Control Systems/Oxygen Sensor/Service and Repair/Removal and Replacement/Heated Oxygen Sensor and Heated Oxygen Sensor 2.
3
Nut
‹› M8 - 25 Nm
‹› M10 - 40 Nm