Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Maintenance > Alignment > System Information > Service and Repair > Wheel Alignment Test Prerequisites > Page 1266

Page 3
background image

1) If steering wheel is crooked at end of alignment procedure, it must be straightened. Then perform basic setting for steering angle sensor (G85) using
Vehicle Diagnosis, Testing and Information System (VAS 5051).

Front Axle Camber, Correcting

Front Axle Camber, Correcting

Special tools, testers and auxiliary items required

‹› Torque wrench (V.A.G 1332)

‹› Camber correction is required only after repair work on chassis. Camber is not adjustable but can be rearranged by moving brackets and/or

Maintenance > Alignment > System Information > Service and Repair > Wheel Alignment Test Prerequisites > Page 1266

[PREV PAGE] [NEXT PAGE]