Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Maintenance > Fluids > Final Drive Fluid <--> [Fluid - Differential] > Component Information > Service and Repair > Generation II Haldex Clutch Oil Level, Checking and Filling > Page 1481

Page 4
background image

-

Install the oil container - A - on the charging device for Haldex 2 couplings (VAS 6291).

-

Now open valve - arrow - and hold oil container as shown in illustration.

Haldex clutch is now filled.

-

Raise vehicle after a few minutes.

‹› If the bevel box is filled correctly, oil should leak out from the adapter - A -.

‹› If no oil is leaking, lower vehicle and perform filling procedure again. 

-

Raise vehicle.

-

If oil is leaking, place an oil container under the Haldex clutch (for example, on a workshop cart).

Overflowing oil now runs back into oil container.

-

If no more oil runs back, remove the charging device for Haldex 2 couplings (VAS 6291).

Maintenance > Fluids > Final Drive Fluid <--> [Fluid - Differential] > Component Information > Service and Repair > Generation II Haldex Clutch Oil Level, Checking and Filling > Page 1481

[PREV PAGE] [NEXT PAGE]