Passat Sedan V6-3.6L (BLV) (2008)
Fuse Block: Service and Repair
Fuse Holder
Fuse Holder
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1410)
‹› Trim Removal Wedge (VAS 3409)
CAUTION!
When disconnecting and connecting battery, the procedure must be followed as described in the Repair Information. Refer to=> [
Battery, Disconnecting and Connecting ] See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting and
Connecting.
‹› The Passat has two fuse panels located on the left and right side of the instrument panel.
‹› The following illustration depicts procedure for removing the left fuse panel. Work procedure for removing right fuse panel is the same.
Removing:
-
Disconnect battery. Refer to => [ Battery, Disconnecting and Connecting ] See: Starting and Charging/Battery/Service and
Repair/Procedures/Battery, Disconnecting and Connecting.
-
Remove side cover - 1 - of instrument panel, do this by inserting (VAS 3409) or a screwdriver into recess - 2 - and pry off cover - 1 - in -
direction of arrow -.
-
Remove screws - arrows - and guide fuse panel - 1 - out toward inside, considering length of available cable.