Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Maintenance > Fuses and Circuit Breakers > Fuse Block > Component Information > Service and Repair > Main Fuse Box > Page 1650

Page 5
background image

-

Remove E-box bracket - 2 - from vehicle.

Installing:

Install in reverse order of removal, noting the following:

-

Tighten the screws and nuts to the tightening specifications. Refer to => [ Fastener Tightening Specifications, E-box, In Engine Compartment, Left
Side ] See: Power and Ground Distribution/Electrical Accessory Panel/Specifications/Fastener Tightening Specifications, E-box, In Engine
Compartment, Left Side.

-

Place cover - 2 - onto E-box and slide securing bracket -  1 - in - direction of arrow - until cover -  2 - is engaged.

‹› Then check whether cover - 2 - of E-box is correctly engaged.

Maintenance > Fuses and Circuit Breakers > Fuse Block > Component Information > Service and Repair > Main Fuse Box > Page 1650

[PREV PAGE] [NEXT PAGE]