Passat Sedan V6-3.6L (BLV) (2008)
-
Slide the (T10238) as shown into the openings designated for it until it stops and remove the accelerator pedal module.
Installing
-
Connect the connector - 1 - to the accelerator pedal module - 4 -. Lock the connector - arrow -.
-
Press the accelerator pedal module onto the retaining pins - 5 -.
-
Insert the centering pin - 6 - into the hole on the vehicle floor.
-
Install the accelerator pedal module with the bolt - 2 - and install the cap - 3 -.
-
Reinstall the steering column cover and fasteners - arrows -.