Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Powertrain Management > Computers and Control Systems > Variable Valve Timing Actuator > Component Information > Locations > Page 3375

Page 2
background image

-

Using a multimeter, check the Camshaft Adjustment Valve 1 Intake (N205) or Camshaft Adjustment Valve 1 Exhaust (N318) for resistance.

-

Measure from pin 1 to pin 2 of the appropriate adjustment valve solenoid.

Specified value: 10.0 to 13.0 ohms (at approx. 20° C)

If the specified value was not obtained:

-

Replace the Camshaft Adjustment Valve 1 Intake (N205) or Camshaft Adjustment Valve 1 Exhaust (N318).

If the specified value was obtained:

Powertrain Management > Computers and Control Systems > Variable Valve Timing Actuator > Component Information > Locations > Page 3375

[PREV PAGE] [NEXT PAGE]