Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Powertrain Management > Computers and Control Systems > Variable Valve Timing Actuator > Component Information > Service and Repair > Camshaft Adjuster With Timing Chain, Installing

Page 1
background image

Variable Valve Timing Actuator: Service and Repair
Camshaft Adjuster With Timing Chain, Installing

Camshaft Adjuster with Timing Chain, Installing

‹› A revised camshaft adjuster is being installed as of 12.08. To recognize this, the exhaust camshaft adjuster 32A has a plastic cover.

=> [ Vehicles through 11.08 ] 

=> [ Vehicles from 12.08 ] 

Vehicles through 11.08

Special tools, testers and auxiliary items required

‹› Camshaft Bar (T10068 A)

‹› Counter-Holder Tool (T10069)

‹› Torque Wrench (5-50 Nm) (V.A.G 1331)

‹› Torque Wrench (40-200 Nm) (V.A.G 1332)

‹› Adjustment Tool (T10332) (Without a mechanical vacuum pump)

‹› Adjustment tool (T10363) (With a mechanical vacuum pump)

‹› Sealant (D 176 501 A1)

-

Rotate the crankshaft, using the vibration damper bolt, in engine rotation direction to the Top Dead Center (TDC) mark - arrow  - for cylinder 1.

-

Position the camshafts in the cylinder head to the TDC for cylinder 1.

The camshaft lobes - A - for cylinder 1 must face each other.

Powertrain Management > Computers and Control Systems > Variable Valve Timing Actuator > Component Information > Service and Repair > Camshaft Adjuster With Timing Chain, Installing

[PREV PAGE] [NEXT PAGE]