Volkswagen Workshop Manuals
Passat Sedan V6-3.6L (BLV) (2008)
Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Fuel Delivery and Air Induction > Fuel Pressure Sensor/Switch > Component Information > Testing and Inspection > Fuel Pressure Sensor, Checking > Page 2823
Switch the ignition off.
If specified value is obtained:
Replace the Low Fuel Pressure Sensor (G410)
If the specified value was not obtained:
Checking wiring connections
If the manufacturers test box is being used. Perform the following step.
Install the test box.
If the manufacturers test box is not being used. Perform the following step.
Remove the Motronic Engine Control Module (ECM) (J623). Refer to the Repair Information.
|[PREV PAGE] [NEXT PAGE]|