Passat Sedan V6-3.6L (BLV) (2008)
-
Align ignition coils with power output stages into designated recesses of cylinder head cover.
-
Connect all connectors to ignition coils - arrows -.
-
Press ignition coils with power output stages onto spark plugs by hand until stop. They must engage audibly.
-
Secure wiring using bolts - 1 -.
-
Install engine cover.
6-Cylinder FSI
Perform the following work procedure:
-
Carefully loosen connector retainer with help of assembly tool (T10118) and remove connector.
-
Then place Puller (T10095 A) on ignition coils with power output stages and remove them.