Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Alarm Module, (Vehicle Antitheft) > Component Information > Service and Repair > Anti-Theft Immobilizer Reading Module > Page 20

Page 1
background image

Alarm Module: Service and Repair
Towing Recognition Control Module (J345)

Towing Recognition Control Module (J345)

Special tools, testers and auxiliary items required

‹› Torque Wrench (V.A.G 1783)

Removing:

-

Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).

-

Remove left side panel trim in luggage compartment.

-

Disengage connectors - 2 - and disconnect them from Towing Recognition Control Module.

‹› The number of connectors on the towing recognition control module can deviate from the illustration depending on the vehicle equipment.

-

Remove mounting bolts - 1 - and remove towing recognition control module with bracket out of vehicle.

-

Remove mounting bolts - arrows - and remove towing recognition control module from bracket.

Installing:

Install in reverse order of removal, noting the following:

‹› After installing a new towing recognition control module, it must be coded, refer to => [ Towing Recognition Control Module, Coding ] See:

Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Alarm Module, (Vehicle Antitheft) > Component Information > Service and Repair > Anti-Theft Immobilizer Reading Module > Page 20

[PREV PAGE] [NEXT PAGE]