Passat Sedan V6-3.6L (BLV) (2008)
Air Bag Control Module: Service and Repair
Airbag Control Module J234
When working on the airbag control module always not the safety guidelines when working on airbags, belt tensioners and battery
Disconnect vehicle battery.
Remove footwell trim. Refer to => [ Footwell Trim ] See: Body and Frame/Interior Moulding / Trim/Utility Storage Compartment/Service and
Repair/Storage Compartments, Covers and Trim
‹› To provide a better overview, the adjacent components are only partially shown in the illustration.
Grasp, from passenger side footwell out, with (3370) behind catch - 1 - from connector - 2 -.
Pull (3370) outward and release securing mechanism from connector.
Swing bracket - 3 - back - arrow - and disconnect bracket from control module - 4 -.
Remove three nuts - arrows - (9 Nm).
Remove the control module from the vehicle.