Volkswagen Workshop Manuals
Passat Sedan V6-3.6L (BLV) (2008)
Relays and Modules > Relays and Modules - Steering and Suspension > Relays and Modules - Steering > Steering Column Control Module > Component Information > Service and Repair > Electronic Steering Column Lock Control Module > Page 394
Carefully pull steering column electronic systems control module downward from Steering Column Combination Switch (E595).
‹› When disconnecting, the harness connectors to Airbag Spiral Spring/Return Spring With Slip Ring (F138) and to segment sensor for steering angle
sensor are disconnected automatically.
Release electrical connection - 1 - by pulling locking button - arrow A - and pulling connection - 1 - from steering column electronic systems
Remove securing latch - 3 - from harness connector - 2 -.
Disengage lock - arrow B - on electrical connection - 2 - and disconnect from steering column electronic systems control module.
Install in reverse order of removal, noting the following:
‹› Make sure that none of the pins are bent and that the connector clicks into the place.
|[PREV PAGE] [NEXT PAGE]|