Passat Sedan V6-3.6L (BLV) (2008)
3. Check affected solenoid resistance at connector plug T14 or T10 on transmission housing and at wiring harness connection to Transmission
Control Module (TCM). Target values are in GFF test plan.
(Refer to pin assignment in GFF test plan)
Check pins according to DTCs that are stored in the Scan Tool.
4. If resistance on solenoid is within specification:
Using appropriate wire from VAS 1978 Repair kit, run an overlay wire from plug T14 or T10 to TCM.
5. Perform vehicle test drive.
If fault does NOT return:
Repair wiring harness with wiring harness repair kit VAS 1978.
If fault returns or resistance on transmission housing connector is not within specification:
Contact technical assistance by selecting "Technical Assistance" tab in ElsaWeb and follow instructions to obtain a 6 digit pin.
Required Parts and Tools
No Special Parts required.
Wiring Harness Repair Kit
* Call Volkswagen Tools and Equipment Program (EQS), which is Equipment Solutions for product.
All part and service references provided in this Technical Bulletin are subject to change and/or removal. Always check with your Parts Dept. and Repair
Manuals for the latest information.